Application of our ProNature Oils
Stir material well before application. ProNature Oils is applied liberally using a brush or short bristle paint roller until saturation is reached. In order to avoid glossy spots and prolonged drying it is important to remove and dry off any excess thoroughly that has not been absorbed after about 15 min using a lint-free cloth or a floor polishing machine leaving a surface dry to the touch. Leave to dry for 12 hrs.
A light sanding after drying is recommended . Then thinly apply second coat of ProNature Oil. Remove any excess thoroughly that has not been absorbed directly after application using a lint-free cloth or a floor polishing machine (soft pad) leaving a surface dry to the touch. Allow drying for a minimum of 12 hrs. If a third coat is desired, proceed as described under step 2 above.

Cold weather and high humidity will retard the drying.

Safety Precautions & Basic Guidelines
• ProNature oils are ignitable. Keep out of the reach of children.
• Soaked, used cloths may spontaneously combust and should be spread open or kept safely in a tightly     
  sealed tin after use.
• Adequate ventilation should be provided with any application of ProNature products. Natural paints and 
  finishes can have a strong characteristic fragrance from the natural raw materials used in the product.

• Application temperature should be at least 12 ° C
• Keep out of reach of children
• Keep product stored from sun and heat
• Keep away from flame or spark
• Protect from freezing
• Store closed container in a cool, dry place
• Oil-soaked rags could self ignite - dry out or put in water
• Use product in a well-ventilated area